input 66 technical specifications the xws series are high powered dc to dc converters that cover a wide range of industrial, as well as general, applications. available input voltages include 12v, 24v, 48v, and 60v, ouput voltages are available from 5v to 24v. the xws features remote sense leads for accurate point of load regulation, and has short circuit and over current protection. for dual and triple output high power solutions, see ipds xwd and xwt series of converters. ? high power package ? wide input range ? 4 input voltage ranges ? water washable ? trim and enable pins ? remote sense pins ? 500 vdc isolation ? short circuit protection turn-on time 10 ms remote shutdown ttl and cmos compatible, positive logic switching frequency 200 khz isolation input - output 500 vdc temperature coefficient 0.02%/c case temperature operating range -25 to + 85c ?? storage range -40 to + 125c thermal shutdown range 105 to 1 15c humidity max, non-condensing 95% vibration, 3 axes, 5 min each 5 g, 10 - 55hz mtbf ? (bellcore tr-nwt-000332) consult factory safety consult factory weight (approx.) 15.4 oz. setpoint accuracy 1% line regulation v in min. - v in max., i out rated 0.2% vo load regulation i out min. - i out max., v in nom. 1% vo minimum output current 10 % dynamic regulation, loadstep 25% io pk deviation 4% vo settling time 500 us voltage trim range 10% current limit threshold range, %io rated 110% - 130% short circuit protection continuous ovp all models voltage range 12 vdc nominal 10 - 20 vdc 24 vdc nominal 18 - 36 vdc 48 vdc nominal 36 - 72 vdc 40 vdc nominal (wide input) 20 - 60 vdc input ripple current 20% iin max reverse input current 100% iin max key features xws series output general eff. vs load (48v in ) ? mtbf predictions may vary slightly from model to model. ?? industrial temp range available specifications typically at 25 c, normal line, and full load - unless otherwise stated. specifications subject to change without notice. n o t e s 888-ipd conv erter www.ipdconverters.com 4 7 3 2 6 6 8 single 150 watt eff. vs load (24v in ) 65 70 75 80 85 90 95 10 20 30 40 50 60 70 80 90 100 load % efficiency% xws4805 xws4815
single 150 watt * max input current an minimum input voltage, maximum rated output power ** at nominal v in , rated output. specifications are subject to change without notice. models mechanical drawing 67 (millimeters) (millimeters) (millimeters) (millimeters) (millimeters) .x 1.0 .xx .25 .05 888-ipd conv erter www.ipdconverters.com 4 7 3 2 6 6 8 thermal impedance natural convection 2.5 c/w 100 lfm 2.1 c/w 200 lfm 1.7 c/w 300 lfm 1.3 c/w 400 lfm 1.1 c/w tolerances (unless otherwise specified) inches inches inches inches inches .xx .040 .xxx .010 pin: pin: pin: pin: pin: .002 pin function 1 no pin 2-v in 3-v in 4+v in 5+v in 6 enable 7 case 8-v out 9-v out 10 +v out 11 +v out 12 - sense 13 trim 14 + sense ? .18 (4.6) .52 (13.2) ? .041 13pls. ( ? 1.04) #4-40 threaded inserts 4pls. 3.50 (88.90) .92 (23.37) .375ea. (9.53) 3.000 (76.20) 4.300 (109.22) 5.50 (139.70) bottom view .25 (6.3) 8 9 10 12 11 13 14 1 2 3 5 4 6 7 for terminal strip add suffix -ts to part number for heatsink add suffix -hs to part number v in v in range i in max. * v out i out rated ripple & noise efficiency model (volts) (volts) (amps) (volts) (amps) pk-pk (mv) typ.** thermal impedance data is dependant on many environmental factors. the exact thermal performance should be validated for specific application. 12 12 12 12 24 24 24 24 48 48 48 48 40 40 40 40 10 - 20 10 - 20 10 - 20 10 - 20 18 - 36 18 - 36 18 - 36 18 - 36 36 - 72 36 - 72 36 - 72 36 - 72 20 - 60 20 - 60 20 - 60 20 - 60 13.9 16.9 16.7 15.7 10.9 12.9 12.8 13.6 5.5 6.5 6.5 6.8 10.3 12.4 12.2 12.9 5 12 15 24 5 12 15 24 5 12 15 24 5 12 15 24 20 10.4 8.3 5 30 15 12 8 30 15 12 8 30 15 12 8 50 120 150 240 50 120 150 240 50 120 150 240 50 120 150 240 79% 81% 82% 84% 84% 85% 86% 86% 82% 85% 85% 86% 80% 80% 81% 82% xws1205 xws1212 xws1215 xws1224 xws2405 xws2412 xws2415 xws2424 xws4805 xws4812 xws4815 xws4824 xws6005 xws6012 xws6015 xws6024
|
